• Textured, maintenance free plastic • Will not yellow from heat or sun
• 24" width frame typically fits door slabs at least 32" wide, narrower doors usually need the 22" width frame • Includes 1 piece molded outer frame (pre-caulked) and 1 piece molded inner frame • Select for use with installed 1/2" or 1" thick door glass
• Available in white and tan (recommended if you are going to stain your frames) - both colors are paintable
• For use with door thickness of 1-3/4"
Replacement Frame Set If you still love the look of your existing door glass, but need to replace the frame, this frame set will replace an existing door window frame with outer frame dimensions of 24" x 38" (+/-0.25") or 22" x 38" (+/-0.25"), with original glass thickness of 1/2" or 1" thick, and door thickness of 1-3/4". This kit includes 1 inner and 1 outer high performance, molded plastic frame, 1 pack of specially designed screws and 1 pack of screw covers. The outer frame has a factory applied seal that seals the frame to the glass and to the door. Before ordering, ensure that the existing glass is held in place by raised molding.
Please consult the Measurement Guide for any questions on identifying the correct size door, side window or door glass frame kit for your entry system.
9 Light Replacement Frame Set (glass not included)
• Textured, maintenance free plastic. • Will not yellow from heat or sun. • Pre-caulked for easy installation. • 20 year ltd. warranty.
Specifications
Frame Kit Size
24" x 38",
22" x 38"
Frame Type
High Performance Plastic
Frame Light Pattern
9 Light
Door Cut-Out Dimensions
23 in. x 37 in., 21 in. x 37 in.
Door Thickness
1-3/4 in.
Glass Size
22" x 36",
20" x 36"
Glass Panel Thickness
select to fit 1/2 or 1 Inch
Glass Shape
Rectangle
Impact Resistant
No
Product Weight (lbs.)
7
Category
Rectangle
Manufacturer
Novatech (RSL) or ODL, Inc.
Warranty
20 Year Limited Warranty
Guaranteed Fit Program
Guaranteed Fit Program
In a perfect world, everything fits right the first time. You can achieve this enlightened state of mind with Zabitat's Risk-Free Fit Guarantee. Submit the requested information and a photo or two of your application (front door, slider, etc.). Our trained experts will review your submission within 1 business day. If everything is copacetic, you will receive a verification for fit. If your product selection won't work with your application, you will receive a response with new product recommendations or other options.
Moral of the story is, "Measure twice, order once!". In the rare event that a Zabitat expert gets it wrong you are guaranteed a full refund or an exchange if the proper size unit is available, and return shipping fees are on us. *Please note, we are unable to guarantee a fit for arch (rounded) glass.
First thank you for carrying the replacement. Contacted JELD-WEN about a frame replacement (9 panel) for my door. The customer service representative was nice enough to send me a link to your company as they didn't carry the replacement part. The outside portion over time started to crack in two spots and spreading. The door is in great shape but the frame around the glass was becoming ugly.
Vast improvement. Easy to remove the old and the new frame fit perfectly. Glass slid straight and the door looks like new again. I covered the glass in privacy film before installation - so much easier than trying to do it afterwards.
Window frame was perfect replacement, to bad they use UPS to deliver damaged merchandise. Could've filed a claim against UPS but it probably would've got damaged also. A little epoxy made it usable.
This was the correct size ordered after my hubby measured first order wrong. Fit perfectly, easy to install and looks great. The young lady I chatted with about exchange/return was awesome. Great customer support.
Good product, good fit, Easy installation. After removing the old glass, I repainted the door before installing the new frame. Made the door look like new. Thanks for a great product.
Looks great and fit perfectly and was pre-caulked which made it very easy to install unlike another window frame that I bought that wasn't. Fast shipping as well.
The grille is perfect. But the screw bungs do not fit the screw holes. I'm a carpenter of 40 years and installed grille bungs hundreds of times. But these bungs aren't even close to fitting.can you look into this a get me some that fit?
Perfect fit and finish to replace the existing 44 year old, weather-deteriorated original frame for a exterior door window. Install took maybe 5 minutes. Certainly better than replacing an otherwise serviceable door.
Everything was perfect, the delivery, the fit. Since I only ordered the frame to replace a 20+yo frame I was surprised they were identical in every way.
Perfect fit and extremely easy to install. Looks great and exactly what I needed. My only advice is measure several times before ordering to get the perfect size for the L/W, glass thickness, and door thickness.
9 Light Replacement Frame Set (glass not included)
Regular price$114.45
Unit price
• Textured, maintenance free plastic • Will not yellow from heat or sun
• 24" width frame typically fits door slabs at least 32" wide, narrower doors usually need the 22" width frame • Includes 1 piece molded outer frame (pre-caulked) and 1 piece molded inner frame • Select for use with installed 1/2" or 1" thick door glass
• Available in white and tan (recommended if you are going to stain your frames) - both colors are paintable
• For use with door thickness of 1-3/4"
Replacement Frame Set If you still love the look of your existing door glass, but need to replace the frame, this frame set will replace an existing door window frame with outer frame dimensions of 24" x 38" (+/-0.25") or 22" x 38" (+/-0.25"), with original glass thickness of 1/2" or 1" thick, and door thickness of 1-3/4". This kit includes 1 inner and 1 outer high performance, molded plastic frame, 1 pack of specially designed screws and 1 pack of screw covers. The outer frame has a factory applied seal that seals the frame to the glass and to the door. Before ordering, ensure that the existing glass is held in place by raised molding.
Please consult the Measurement Guide for any questions on identifying the correct size door, side window or door glass frame kit for your entry system.