ODL Impact Resistant Blinds Between Low-E Glass 24" x 38" Frame Kit

ODL Impact Resistant Blinds Between Low-E Glass 24" x 38" Frame Kit
+ / - Hover over image to Zoom
Other Views
$713.98
SKU:684CL-CFLAM-LE-RLB
• Designed for security, engineered for strength
• Sealed between impact-resistant laminated glass on the exterior and tempered safety glass on the interior
• Easy to clean, no dusting required
• Light and Privacy Control
Blind Color:
The price of the product might be updated based on your selection
  • White
Frame Color:
The price of the product might be updated based on your selection
  • White Aluminum
any

Get Pro Installation and receive FREE SHIPPING!
Let the pros do the work for you and receive
free home delivery on your order.
Submit
No Thanks, I am going to DIY

Add to Cart

Impact Resistant Blinds Between Glass
Impact-resistant glass is designed specifically for severe weather and high wind areas, including Florida's Wind-borne Debris Region and High Velocity Hurricane Zone (HVHZ) and Texas' Gulf Coast Area. It meets the impact resistance codes and requirements of Florida, Texas, and the Department of Defense, among others. The patented white aluminum frame adds strength to your door, and the impact-resistant laminated glass on the exterior and tempered safety glass on the interior can contribute to the secure feeling you'll experience when the winds start howling! Thermally sealed glass is insulated for air- and water-tight performance. It also adds a level of noise suppression. Because they're protected between glass, enclosed blinds retain their 'like new' look over time and with repeated use. They stay clean and free of damage from kids, pets, and anything else that might come into contact with your doorglass. No dusting, no tangled or dangling cords, and no crimped or dented blinds. With our Light-Touch Blinds, a single-touch control lets you choose the perfect light or privacy level. The ergonomically considered design places the fingertip control within easy reach to tilt, raise, and lower blinds the entire length of the doorglass—with only the slightest movement required. Privacy channels on each side of the doorglass eliminate light gaps when the blinds are closed—no streetlight shadows or sunlight glare. The thermally sealed doorglass can be used in doors to meet ENERGY STAR criteria, giving you energy savings and long-term value, too. They reduce heat loss in the winter and solar heat gain in the summer. Low-E glass options make clear doorglass an energy efficient choice, as well.

Door Glass with Frame Kit
This door glass kit is designed to fit a wide variety of exterior doors manufactured by Therma Tru, Masonite, Jeld-Wen, PlastPro and many others. This kit can be used to either replace existing glass in a door, or to add glass to a door. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers. The door glass frame set consists of 1 inner and 1 outer powder coated aluminum frame. The outer frame has an air and water tight, factory applied seal that bonds the frame to the glass. Before ordering, ensure that the existing glass is held in place by raised molding. The guide below provides door glass and frame kit dimensions:

Replacing Glass
Door Material: Steel or Fiberglass
Door Width: 36", 34", 32" and 30" (+/- 0.75")
Door Height: 6'8" and 7'0" (+/- 0.75")
Door Thickness: 1.75"
Frame Kit Width: 24" (+/- 0.25")
Frame Kit Height: 38" (+/- 0.25")

Adding Glass
Door Material: Steel or Fiberglass
Door Width: 36", 34", 32" (+/- 0.75")
Door Height: 6'8" and 7'0" (+/- 0.75")
Door Thickness: 1.75"
Door Panel: 6 Panel Door and 4 Panel Door
Door Panel Width: 23" (+/- 0.5")
Door Panel Height: 37" (+/- 0.5")

Please consult the Measurement Guide for any questions on identifying the correct size door, side window or door glass frame kit for your entry system.

Typical Industry Names for the Kit
Half Light


Learn more about 24" x 38" door glass inserts.