Impact Resistant Blinds Between Glass
Impact-resistant glass is designed specifically for severe weather and high wind areas, including Florida's Wind-borne Debris Region and High Velocity Hurricane Zone (HVHZ) and Texas' Gulf Coast Area. It meets the impact resistance codes and requirements of Florida, Texas, and the Department of Defense, among others. The patented white aluminum frame adds strength to your door, and the impact-resistant laminated glass on the exterior and tempered safety glass on the interior can contribute to the secure feeling you'll experience when the winds start howling! Thermally sealed glass is insulated for air- and water-tight performance. It also adds a level of noise suppression. Because they're protected between glass, enclosed blinds retain their 'like new' look over time and with repeated use. They stay clean and free of damage from kids, pets, and anything else that might come into contact with your doorglass. No dusting, no tangled or dangling cords, and no crimped or dented blinds. With our Light-Touch Blinds, a single-touch control lets you choose the perfect light or privacy level. The ergonomically considered design places the fingertip control within easy reach to tilt, raise, and lower blinds the entire length of the doorglass—with only the slightest movement required. Privacy channels on each side of the doorglass eliminate light gaps when the blinds are closed—no streetlight shadows or sunlight glare. The thermally sealed doorglass can be used in doors to meet ENERGY STAR criteria, giving you energy savings and long-term value, too. They reduce heat loss in the winter and solar heat gain in the summer.Door Glass with Frame Kit
This door glass kit is designed to fit a wide variety of exterior side windows (side lights) manufactured by Therma Tru, Masonite, Jeld-Wen, PlastPro and many others. This kit can be used to replace existing glass in a side window and contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers. The door glass frame set consists of 1 inner and 1 outer powder coated aluminum frame. The outer frame has an air and water tight, factory applied seal that bonds the frame to the glass. Before ordering, ensure that the existing glass is held in place by raised molding. The guide below provides side window and frame kit dimensions:Replacing Glass
Side Window Material: Steel or Fiberglass
Side Window Width: 10", 12" and 14"
Side Window Height: 6'8" and 7'0"
Side Window Thickness: 1.75"
Frame Kit Width: 9" (+/- 0.25")
Frame Kit Height: 66" (+/- 0.25")Please consult the Measurement Guide for any questions on identifying the correct size door, side window or door glass frame kit for your entry system.Typical Industry Names for the Kit
Full SidelightLearn more about 9" x 66" door glass inserts.